- Adhesives & Sealants[10]
- Other Organic Chemical[9]
- Polymer[3]
- Belt Making Machinery[3]
- Chemical Product Machinery[1]
- Conveyors[4]
- Mining Machinery Parts[10]
- Other Refrigeration & Heat Exchange Equipment[1]
- Rubber Processing Machinery[4]
- Transmission Belts[5]
- Plastic Sheets[10]
- Rubber Processing Service[1]
- Other Rubber Products[10]
- Caulking Gun[2]
- Knife[1]
- Other Hand Tools[6]
- Other Tools[10]
- Power Tool Accessories[1]
- Glue Gun[8]
- Grinder[3]
- Hot Melt Glue Sticks[1]
- Polisher[1]
- Hand Tool Sets[1]
- Contact Person : Mr. Lee Tianchi
- Company Name : Zhengzhou Dipute Chemical Co., Ltd.
- Tel : 86-371-63486729,13937150950
- Fax : 86-371-63486729
- Address : Henan,Zhengzhou,No.1 shangdu road zhenghongshan3-1-1703
- Country/Region : China
Related Product Searches:Epoxy Putty Stick for underwater repair,High Quality,Epoxy Putty Stick, Putty Stick,AquaMend
Epoxy Putty Stick for underwater repair
AquaMend Underwater Repair Epoxy Putty Stick
Product Description:
AquaMend is a hand-mixable, specialty epoxy putty for repairs to
damp, wet areas and underwater surfaces. After mixing, it forms a
polymer compound that may be applied underwater (either fresh or
salt water) and will bond tenaciously to substrates such as fiberglass,
concrete, glass, ceramic, metal, wood, and many plastics. Each stick
contains pre-measured portions of activator and base throughout —
no measuring or mixing tools are necessary. The consistency (like
modeling clay) eliminates drips and runs, facilitates adhesion to the
substrate, and allows the material to be shaped and formed as needed
before curing begins. After 60 minutes the application can be drilled,
sawed, sanded, carved, and painted. AquaMend cures to an off-white
color. Suitable for interior or exterior use, it is resistant to chemicals,
water, and temperature extremes. AquaMend contains no solvents
or VOCs. It is non-flammable and releases no noxious fumes. It won't
shrink or pull away. The unused portion stays fresh for future use
when saved in its original package.
Performance Data*:
SHELF STABILITY AT 75°F (24°C), minimum 24 months
SHORE D HARDNESS AT FULL CURE (24 hrs) 70
LAP SHEAR TENSILE STRENGTH
On steel (1" x 1" x 1/16") 900 lbs (6.2 MPa)
On fiberglass (1" x 1" x 1/16") 500 lbs (3.5 MPa)
COMPRESSIVE STRENGTH 8,000 psi (55 MPa)
DENSITY 15.8 lb/gal, 1.9 gm/cm3)
SHRINKAGE <1%
NON-VOLATILE CONTENT 100%
ELECTRICAL RESISTANCE 30,000 megohms
DIELECTRIC STRENGTH 300 volts/mil
UPPER TEMPERATURE LIMITS
Continuous 250°F (121°C)
Intermittent 300°F (149°C)
CHEMICAL RESISTANCE
Resistant to hydrocarbons, ketones, alcohols, esters,
halocarbons, aqueous salt solutions and dilute acids
and bases.
Epoxy Putty Stick for underwater repair